Skip to main content

ALL CUSTOMERS: PLEASE CALL THE STORE REGARDING AVAILABILITY ON ALL ITEMS. THIS WILL ENSURE THAT THE ITEMS YOU ARE LOOKING FOR ARE IN STOCK AND AVAILABLE FOR PURCHASE. THANK YOU!

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Eclypse Air Control Brake Rotor
- 410 Stainless steel construction - (6) Black M5 mounting bolts - 85g (160mm)
SRAM Force CX1 ErgoDynamic Left Brake Lever
SRAM's Force CX1 ErgoDynamic levers are descended from the top-end RED, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike. Designed for a 1 x 11 setup, this left-side, brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.
SunRace MX 11-Speed Cassette
The SunRace MX 11-Speed Cassette is a wide-ratio cassette designed for XD driver bodies. - Largest sprocket crafted from A7075 aluminum - Black chrome finish - 460% range - Cassette Body Type: SRAM XD 11/12 Speed - Drivetrain Speeds: 11 - Weight: 502 g
SunRace MX3 10-Speed Cassette
The Sunrace MX3 10 speed cassette is a cost effective upgrade or replacement cassette. - Alloy spiders, lockring and spacers - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Drivetrain Speeds: 10
SunRace RS1 10-Speed Cassette
RS1 Cassettes are a great replacement for 10-speed road sytems. - Steel Spider - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Cassette Cogs: 11-12-13-14-15-17-19-21-24-28 - Drivetrain Speeds: 10 - Weight: 267 g
Sunlite 5mm Housing Ferrules
$0.39
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Sunlite Head Bearing Lower
$0.39
Replacement bearing for the lower half of YST8003 #7 headset.
Sunlite Head Bearing Top
$0.39
Replace the top bearing in your YST8300 headset with these caged ball bearings.
Sunlite Cable End Button
$0.79
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
AheadSet Universal Preload Bolt
$0.90
- Aheadset preload adjusting bolt
Cane Creek 10-Series Interlok Headset Spacer
$0.90
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Bontrager Rubber Brake Cable Boot
$0.99
• Designed to keep dust and dirt out of V-Brake cable/housing systems
Kink Boulevard Hub Guard
$0.99
Designed exclusively for use with the Kink Boulevard front hub, the Boulevard guard is injection molded from durable nylon material. These guards slide directly over the existing hub hardware, so no additional parts or disassembly are required. This guard can be used on one or both sides of the Boulevard hub, providing protection where you need it.
Kink Incite Hub Guard
$0.99
Designed for use with Kink Incite rear hubs, the Incite Hub Guard is injection molded from a durable nylon material. This hub guard slides directly over the existing hub hardware, so no additional parts or disassembly are required. This guard fits the non-drive side of Kink rear hubs only.
Sunlite Stem Binder Bolt
$0.99
- w/Nut - 1-3/4-inch
Sunlite Stem Bolt
$0.99
- 8x1mm Allen head
Sunlite Sunlite Derailleur Clamp Bolt
$0.99
- Model: Replacement bolt - Compatibility: Allen, M5x16
KMC MissingLink Connector
$1.00 - $48.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Sturmey-Archer 8-Speed Sprocket And Circlip
$1.01 $2.00 50% Off
- 3-spline steel cogs for use with Sturmey 8-speed internal gear rear hubs - Flat or dished for tuning chainline. Chrome plated
Hayes Bleed Kit Adapter
$1.05 - $2.75
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Sunlite Adjusting Barrel
$1.19
- Aluminum w/lock nut - 18mm long/6mm O.D.
Sunlite Anchor Bolt
$1.19
- Replacement cable anchor bolt for brakes - Includes nut and washer
Dimension Anodized Bolt M5x.8 16mm
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
KMC 415H Connecting Link
$1.35
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
Sunlite Adjusting Barrel w/ Mount
$1.39
- Aluminum w/lock nut and mount - Slotted mount design
Sunlite Crank Dust Cap
$1.39
- Crank dust cap - Works with most three-piece crank models
Sunlite Hex Head Seat Binder Bolt and Nut
$1.39
- Chrome - Sold individually
KMC Half Link Adapter
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Page 1 of 190 Next page